24" Transitional Decorative Grab Bar in Matte Black

Model#: 41724-BL
24~ Transitional Decorative Grab Bar
24" Transitional Decorative Grab Bar in Matte Black
Model#: 41724-BL
List Price: $19310
Documents & Specs
Installation Information
Overall Height :
3
Wattage :
0
Valve Type:
NA

INSTALLATION SUPPORT

Need help with installation? Find local Delta® installers. Get Quotes. Read reviews.

GO
Enter Valid Zip.
Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
Bilt Logo Intelligent Instructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instructions.

REVIEWS
Rated 4 out of 5 by from Template Needed I installed two of these 24” grab bars after a contractor quoted $1300 to install them. I first installed one at the toilet with one end on a stud and used the wall anchor for the other end. The anchor was difficult to insert into the 3 1/2” wall cavity and the plastic ring did not stick to the back of the mounting plate , so it was difficult to get that tightened up. Luckily, my layout was right on for the bar to fit over the plates and the set screw to secure them. I used a ratcheting driver with hex bit after stripping one set screw. I was more weary about installing the bar on the marble tile at the shower. I located the studs on the opposite side of the wall and transferred the measurement to the shower side. Studs were 16” o.c., so plan was to catch two studs with grab bar on approximately a 45 degree angle. Here is where a template was really needed. I ended up making a template on tape adhered to the wall, traced the ends of the grab bar centered on the stud lines, and marked the holes from the mounting bracket before drilling. The top right and bottom left holes were angled to the stud, but caught. I think a set of holes that would be vertical for this arrangement would be useful. Or more holes in the grey anchor plate. In the end, it turned out sturdy and beautiful, and I’m glad I didn’t screw it up.
Date published: 2023-08-10
Rated 5 out of 5 by from Beautiful! This grab bar is very beautiful and stylish as well as extremely sturdy.
Date published: 2023-06-06
Rated 5 out of 5 by from Stable support It is wonderful. Its color matches well with the shower head. It offers very stable support.
Date published: 2023-04-02
Rated 5 out of 5 by from Great Looking! Very happy with grab bars! Matched other bathroom hardware.
Date published: 2022-12-03
Rated 5 out of 5 by from Hefty Grab bar - very sturdy Nice set - bought all Windemere - easy clean
Date published: 2022-10-26
Rated 5 out of 5 by from Love it! Looks great and is very sturdy
Date published: 2022-05-24
Rated 5 out of 5 by from Nice Style Good Quality and nice look for a safety product
Date published: 2022-04-05
Rated 5 out of 5 by from Delta grab bar Excellent quality product, little pricey, but overall it’s worth it.
Date published: 2022-02-10
  • y_2024, m_1, d_23, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_41724-BL, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Q&A

Can texture tape be added to the matte black grab bar?

Asked by: terensia
Hi, Terensia! Thank you for your question. We do not recommend to modify the Delta 41724-BL Towel Bar in such a way that may effect the finish. Doing so may result in voiding any warranty the towel bar may have. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2020-05-30

Does Delta have a hand shower mount that will fit this grab bar?

Asked by: Alan
Thank you for your question, Alan! Unfortunately we do not offer a hand shower mount that will work with this grab bar. Best regards, Edward
Answered by: Delta Faucet
Date published: 2020-03-07

Can the Delta Faucet 41718, 18-Inch Transitional Grab Bar be cut down to a 20" size

Asked by: grab bar
Hello grab bar, Thank you for your question on the Delta 24" Transitional Decorative ADA Grab Bar on deltafaucet.com: "Can the Delta Faucet 41718, 18-Inch Transitional Grab Bar be cut down to a 20" size" I would love to answer your question. These bars can be cut down in length. However, this action is not recommended as doing so will void your warranty. I hope this was helpful! If you have any other questions about this product you can call 800-345-3358 for answers and assistance. Thanks again, Caleb Delta Faucet Company
Answered by: Sarah
Date published: 2019-03-07

Does Delta sell a handheld shower mount in stainless to put on the 24" ADA grab bar

We would like to use the Transitional decorative ADA grab bar 24" in the shower as a slide bar for a handheld shower. Does Delta have a coordinating stainless mount that would fit this bar?
Asked by: Jen
Hi Jen, Thank you for your question! Unfortunately, we do not have a hand shower mount that will fit this bar. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-11-14

Can you use this inside the shower stall without damage to the finish?

Asked by: Charlie
Thank you for your question, Charlie! The 41724-RB ADA compliant grab bar is intended for use inside the shower stall. A Delta finish is extremely durable however we would ask that care is taken when cleaning as many products contain harsh chemicals that will damage this finish as well as void the warranty. Below is a link to our cleaning and maintenance guide for more information on approved products. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-04-01

Is it possible to shorten the length of the bar?

Asked by: debejer
Thank you for your question, debejer! Although this bar can be cut to the needed length, it is not recommended as any resulting damage will void the warranty. The Transitional grab bar is also offered in 18" or 12" versions. Please contact us directly if you have questions or need any further assistance. https://www.deltafaucet.com/product-comparison?modelNumber=41712&modelNumber=41718 Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-03-09

Does this grab bar have texture for grip?

Asked by: Construct
Hello Construct, Thank you for your inquiry! The grab bar 41724-SS is not designed with any texture grip patterns or spots on it for grabbing. https://media.deltafaucet.com/SpecSheet/DSP-A-41712%20Rev%20E.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-11-03

Can the Delta Transitional Decorative ADA Grab Bar - 24" be used in the shower and if so, are there any special installations instructions?

I want to use this bar in the shower as a towel bar. Will water affect it (ie rusting) and are there special instructions for installation?
Asked by: janie
Hello Janie, Thank you for your question. Delta model 41724 can be used in the shower. The only instructions needed for this unit are the installation instructions available under Documents and Specs tab. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-11-21
  • y_2024, m_1, d_23, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_41724-BL, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 5ms
  • questions, product
* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.